Demilec Attic Cleaning & Rodent Proofing in La Puente: What to Know First
We provide independent Demilec attic cleaning and rodent proofing in La Puente, typically completing most jobs in one to two days with a written price locked before any work starts. As an independent Demilec service provider, we are not affiliated with or authorized by Demilec, which means we source parts based on what actually solves the problem, not what moves a dealer’s inventory. Most Demilec attic restoration jobs in La Puente run between $2,800 and $5,400 depending on contamination level, accessible square footage, and whether the existing Demilec spray foam needs selective removal or full replacement. This page is for homeowners who found rodent damage, nesting debris, or compromised insulation in an attic where Demilec open-cell or closed-cell foam was installed, and who want the work documented with photos and a written scope before anyone opens a tool bag. Call (626) 509-3237 for a free estimate.
How Demilec Products Fail - and How We Fix Them
- Demilec SEALECTION 500 open-cell foam degraded by rodent urine. SEALECTION 500 is hydrophilic - it absorbs moisture - and when rodents nest against it, the ammonia in urine breaks down the polymer structure over time, creating a persistent odor that standard cleaning won’t touch. We remove the contaminated foam in sections, HEPA-vacuum the substrate, apply an enzymatic decontamination treatment, and reinstall with closed-cell Demilec Heatlok HFO Pro or an equivalent where moisture resistance matters.
- Heatlok HFO Pro delamination from roof sheathing in La Puente’s summer heat. The San Gabriel Valley sees sustained attic temperatures above 140°F in July and August; if the substrate wasn’t properly primed or the foam was applied too thin at the pass, the HFO Pro can pull away from the sheathing, creating gaps where rodents travel and insulation value drops to near zero. We cut out the delaminated sections, re-prep with manufacturer-specified primer, and reapply to the correct pass thickness, documenting each layer with photos.
- Demilec AgriThane agricultural-grade foam misapplied in residential attics. We’ve found AgriThane in two La Puente homes near Hacienda Boulevard, likely installed by a generalist who treated it as interchangeable with residential lines. AgriThane has a higher density and different off-gassing profile than SEALECTION or Heatlok; when rodents compromise it, the cleanup requires respirator-rated PPE and controlled ventilation. We remove it completely, ventilate the attic to safe levels verified with air quality metering, and reinstall with the correct residential-spec foam.
- SEALECTION AgriBalance compromised by rodent tunneling at eave baffles. AgriBalance is marketed as a sustainable option, but its slightly lower density makes it more susceptible to rodent gnawing at the eaves where baffles are missing or improperly installed - common in 1960s and 1970s tract homes south of the 60 Freeway in La Puente. We replace the damaged foam, install proper cardboard or foam baffles to maintain the vent channel, and rodent-proof the eave with galvanized steel mesh before closing up.
- Demilec foam encapsulating old fiberglass, creating a trapped contamination layer. When Demilec foam is sprayed directly over rodent-soiled fiberglass batt without removal first, the foam locks in pathogens, odors, and allergens. We see this most often where a previous contractor prioritized speed over sequence. Our fix is complete removal: the foam comes out, the fiberglass comes out, the substrate is sanitized, and only then do we reinstall - foam or otherwise - with a clean building science sequence.
Our Demilec Attic Cleaning & Rodent Proofing Process

- 1
Written price and scope before entry. We inspect the attic access, document what we can see from the hatch, and deliver a flat price with line items for foam removal, decontamination, rodent proofing, and reinstallation. No work starts without a signed scope.
- 2
Contamination assessment and air quality check. We test for airborne particulate and ammonia levels before disturbing anything. If levels exceed safe thresholds, we set up negative air scrubbers before removal begins.
- 3
Selective or full Demilec foam removal. Based on the damage pattern, we remove compromised foam with controlled cutting and HEPA extraction, bagging debris for proper disposal. We photograph each stage.
- 4
Substrate decontamination and rodent exclusion. The exposed sheathing and framing receive enzymatic treatment, then we seal all entry points - eaves, roof jacks, plumbing penetrations, chimney gaps - with galvanized steel mesh and appropriate sealants.
- 5
Reinstallation with correct material spec. We reinstall Demilec foam, Reflectix radiant barrier, or alternative insulation based on what the attic actually needs, not what we have in the truck. Every job gets a pre- and post-depth log showing R-value achieved.
- 6
Documented photo record delivery. The homeowner receives a digital folder with dated photos of removal, decontamination, exclusion work, and final installation, plus the written warranty under our 365-Day Done Right Promise.
What Demilec Attic Cleaning & Rodent Proofing Costs in La Puente
Most Demilec attic restoration jobs in La Puente fall between $2,800 and $5,400. Here’s what moves the needle:
- Partial foam removal with spot decontamination: $2,800-$3,600. Limited rodent activity, one or two compromised areas, no structural damage.
- Full foam removal, complete decontamination, and reinstallation: $4,200-$5,400. Widespread contamination, multiple entry points, missing or damaged baffles, or delaminated Heatlok requiring substrate re-prep.
- Rodent proofing and exclusion only (no foam work): $1,800-$2,800. For attics where the Demilec foam is intact but entry points need sealing.
Factors that push higher: attics under 3:12 pitch where crawling space is minimal, active infestations requiring coordination with a pest control partner before we enter, and homes near the Puente Hills where older construction has unsealed top plates and balloon framing that complicates air sealing. We also provide a free second opinion on any written estimate you’ve already received - bring us the scope and we’ll read it with you. Call (626) 509-3237 for a written price; estimates are free.
Why La Puente Homeowners Call Topside Attic Insulation La Puente for Demilec Work

We’ve been in and out of attics on both sides of Hacienda Boulevard in La Puente long enough to know which vintage of tract home is most likely to be missing baffles at the eaves. Wes Okafor, our owner, picked up his trade fundamentals at Kennedy-King College on Chicago’s South Side, and his crew sequences jobs the way building science actually demands - air-sealing penetrations and top-plates first, then installing the blown cellulose, fiberglass, or Demilec foam on top. Seal the leaks first. The insulation is just the last layer, not the fix.
Every customer leaves with a written pre- and post-job depth log showing R-value achieved and a photo record of any air-sealing work done before the insulation went in. We also work with Reflectix and other brands when they’re the better fit for the attic’s condition, so you’re not locked into a single manufacturer’s product line. Calls are answered by a live person 24/7, and our 365-Day Done Right Promise means if it’s not done right, we make it right - backed by a written scope and written warranty delivered before anyone starts.
FAQs
No. Demilec’s product warranty covers manufacturing defects and proper-application performance, not damage from rodents, pests, or environmental contamination. We document the damage cause with photos during our inspection so you have a clear record for your homeowner’s insurance if the policy covers rodent-related structural damage. Call (626) 509-3237 and we’ll review your situation.
We source Demilec products through standard distribution channels and also use quality aftermarket foams from Owens Corning, Johns Manville, Knauf, and Icynene when they’re the better match for the attic’s moisture conditions or your budget. We never install a product we can’t document with a spec sheet and install per manufacturer guidelines. The written scope names the exact material before work starts.
Replace when the foam is delaminated, structurally compromised by rodent gnawing over more than 15% of the attic surface, or when urine contamination has penetrated beyond the surface layer and odor persists after spot treatment. Repair is viable for isolated damage with intact substrate adhesion and no persistent odor. We make this call during inspection and put the reasoning in writing.
Most inspections happen within 48 hours of your call, and scheduled work typically starts within 5-7 business days. Active infestations may require a pest control pre-treatment, which can add 3-5 days. We’ll tell you the realistic timeline when we deliver the written price, not after we’ve started.
Not when it’s done correctly. We use controlled cutting with foam-specific blades and avoid prying tools that gouge plywood or OSB. If the foam was applied with inadequate primer and is already delaminated, the sheathing may need light sanding and re-priming - we document this condition during inspection and include any substrate prep in the written scope. Call (626) 509-3237 for an exact assessment; estimates are free.
Ready to get your Demilec attic cleaned, decontaminated, and properly sealed? Call (626) 509-3237 for a free estimate with a written price before any work starts. We answer live 24/7.
Written by Wes Okafor, Owner, Topside Attic Insulation La Puente at Topside Attic Insulation La Puente, serving La Puente and nearby areas.