Insulation in Pomona, CA
Crawl space encapsulation and vapor barrier installation in Pomona typically runs $2,800-$6,500 for a full encapsulation, with most homes in the 1940s-1960s tracts seeing costs at the higher end due to larger footprints and chronic moisture issues from the valley’s clay-heavy soils. We’re Envelope Insulation Co., and we treat air sealing as a hard prerequisite on every job - not an upsell - with before-and-after blower-door numbers published so you can see the performance change you actually paid for. If your crawl space smells musty, your floors are cold in winter, or you’re seeing utility bills climb through Pomona’s 103-108°F summers, call us at (626) 509-3237 for a written price before any work starts.
Why Pomona Homes Are Different
Pomona sits in a heat basin at the foot of the San Gabriel Mountains where summer temperatures routinely hit 103-108°F, a full 10-15°F hotter than coastal LA just 30 miles west. The city’s housing stock is dominated by 1940s-1960s postwar tract homes and early-1900s Craftsman bungalows, most built with near-zero insulation standards and many still containing active knob-and-tube wiring that building inspectors flag as a stop-work condition for insulation permits.
The bowl-shaped valley traps hot air descending from inland deserts and radiating off the I-10 corridor, creating a localized heat-island effect that pushes attic temperatures in uninsulated older homes to dangerous levels. Unlike coastal cities, Pomona also sees periodic winter frost and wider diurnal temperature swings, so insulation must perform across a genuine thermal range. In Lincoln Park and the older flatland neighborhoods, we regularly find original wall cavities completely empty and attics with degraded fiberglass settled to R-11 or below - conditions that make cooling loads here measurably higher than in neighboring Chino Hills.
Our Main Pomona Services
Most Pomona homeowners who call us start with attic work or spray foam, but blown-in remains the practical choice for the city’s older stock where budget and access matter.
Attic Insulation in Pomona
Attic insulation in Pomona means dealing with attics that regularly reach 140-160°F in summer, cooking the living space below through degraded or insufficient existing material. We inspect for knob-and-tube wiring first - a common find in Lincoln Park and the 1940s tracts - and won’t install over energized K&T per Pomona building code. Our crews air seal the attic floor completely before adding insulation, with blower-door documentation showing the actual reduction in air leakage. Attic Insulation in Pomona covers our full process, materials from Owens Corning and Johns Manville, and what the written scope includes.
Spray Foam Insulation in Pomona
Spray foam insulation in Pomona makes particular sense for the city’s older homes with complex rooflines, dormers, and conditioned attic conversions where batts leave gaps that bleed conditioned air. We use open-cell and closed-cell formulations from Icynene and Demilec, specifying closed-cell for rim joists and crawl spaces where moisture resistance matters. Every spray foam job begins with a written price and ends with a documented photo record; applicable jobs include before-and-after blower-door readings. Spray Foam Insulation in Pomona has full details on coverage rates and curing times in our climate.
Blown-In Insulation in Pomona
Blown-in insulation in Pomona is the workhorse solution for the city’s thousands of postwar tract homes with open attic floors and minimal existing material. We blow cellulose from GreenFiber or fiberglass from Knauf and CertainTeed, but only after sealing top plates, can lights, and penetrations - blowing over an unsealed attic floor is something we simply don’t do. The result is a uniform thermal blanket with documented air-leakage reduction. Blown-In Insulation in Pomona explains our prep process and why the sealing matters more than the R-value number alone.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Crawl Space Encapsulation & Vapor Barrier in Pomona
Crawl space encapsulation and vapor barrier work in Pomona addresses a specific regional problem: the Pomona Valley’s clay-heavy soils hold moisture year-round, and the 1940s-1960s tract homes built on these lots typically have vented crawl spaces that import humid air in summer and lose heat in winter. We regularly find rotted sill plates, mold on floor joists, and fiberglass batts hanging saturated from the subfloor in neighborhoods from Lincoln Park to the Phillips Ranch area. Crawl Space Encapsulation & Vapor Barrier is our dedicated service hub for this work.
Crawl Space Vapor Barrier
Signs you need it
Your crawl space has standing water after rain, a persistent musty smell rises through floor vents, or your hardwood floors are cupping from below.
What it costs in Pomona
A 6-mil to 20-mil vapor barrier installed over bare earth in a typical Pomona crawl space runs $1,200-$2,800, with thicker mil ratings and larger footprints pushing toward the upper end.
How we do it
We remove debris and level the ground, seam-seal a reinforced polyethylene sheet at all overlaps, and mechanically fasten it to foundation walls with termination bars to create a continuous moisture block.
Crawl Space Encapsulation
Signs you need it
You’re running a dehumidifier constantly, seeing rust on ductwork, or your energy bills spike despite recent HVAC service - all point to an unsealed envelope below the floor.
What it costs in Pomona
Full encapsulation with vapor barrier, sealed vents, insulated walls, and conditioned air supply for a typical Pomona home ranges $3,500-$8,500 depending on square footage and existing moisture damage.
How we do it
We seal all vents and penetrations, install a multi-layer vapor barrier sealed at seams and walls, add rigid foam insulation to perimeter walls, and introduce conditioned air or a dedicated dehumidifier to maintain relative humidity below 60 percent.
What Crawl Space Encapsulation & Vapor Barrier Costs in Pomona
| Item | Typical range in Pomona |
|---|---|
| Vapor barrier (6-20 mil, earth coverage only) | $1,200 - $2,800 |
| Partial encapsulation (barrier + sealed vents) | $2,800 - $4,500 |
| Full encapsulation (barrier, insulation, conditioning) | $3,500 - $8,500 |
How long does crawl space encapsulation take in Pomona?
Most Pomona crawl space encapsulations take 2-4 days depending on access, existing moisture damage, and whether we need to coordinate with an electrician for any knob-and-tube findings. We deliver a written schedule with the written price before anyone starts - no surprises.
Will encapsulation help with summer cooling costs?
Yes - an encapsulated crawl space stops humid air from being drawn into the living space, which reduces the latent load your air conditioner must remove; in Pomona’s 103-108°F summers, that load reduction is measurable on your utility bill. Call (626) 509-3237 for a free estimate with written pricing.
Radiant Barrier Installation in Pomona
Radiant barrier installation in Pomona is one of the highest-ROI envelope upgrades for this specific climate, where unshaded attics in the 1940s-1960s tracts regularly hit 160°F and radiate heat downward through ceilings that were never designed to block it. The city’s inland position means more annual cooling degree-days than any coastal neighbor, and the postwar homes’ minimal attic insulation means radiant heat transfer dominates the cooling load even more than conduction. Radiant Barrier Installation details our full material specifications and installation methods.
Attic Radiant Barrier
Signs you need it
Your attic feels like a furnace by 10 a.m., upstairs rooms stay hot after sunset, or your AC runs continuously on summer afternoons without reaching setpoint.
What it costs in Pomona
Attic radiant barrier installation for a typical 1,200-2,000 square foot Pomona home runs $1,500-$3,200, with complex rooflines or steep pitches adding labor time.
How we do it
We staple perforated aluminum foil or install foil-faced sheathing across the underside of roof rafters, maintaining a minimum 3/4-inch air gap above the foil to allow convective heat removal through ridge and soffit vents.
Radiant Barrier & Ventilation
Signs you need it
You’ve added insulation but the attic still feels brutally hot, or you notice no airflow at ridge vents despite clear soffit intakes - a combination problem we see in sealed-up older Pomona attics.
What it costs in Pomona
Radiant barrier paired with ventilation upgrades - additional soffit vents, baffles, or powered exhaust - typically runs $2,200-$4,800 in Pomona homes depending on roof configuration.
How we do it
We install the radiant barrier first, then calculate and install balanced intake and exhaust ventilation per the 1:300 rule, using baffles to keep insulation from blocking soffit airflow.
What Radiant Barrier Installation Costs in Pomona
| Item | Typical range in Pomona |
|---|---|
| Attic radiant barrier (foil, staple-up) | $1,500 - $3,200 |
| Radiant barrier with ventilation upgrade | $2,200 - $4,800 |
| Radiant barrier roof deck (new construction or re-roof) | $2,800 - $5,500 |
Does radiant barrier work with existing insulation?
Yes - radiant barrier complements rather than replaces insulation; we install it in the attic rafters to block radiant heat transfer while your existing or upgraded insulation handles conductive heat flow. In Pomona’s extreme attic temperatures, the combination typically reduces cooling loads 10-25 percent.
How long until I see lower bills?
Most Pomona homeowners see reduced AC runtime within the first billing cycle after radiant barrier installation, with full savings visible by the second month of summer use. Call (626) 509-3237 for a written price and blower-door baseline.
Insulation Removal & Replacement in Pomona
Insulation removal and replacement in Pomona is often necessary because the city’s pre-1970 housing stock contains degraded, contaminated, or improperly installed material that performs far below its labeled R-value - if it performs at all. We regularly pull out fiberglass batts compressed by decades of storage use, cellulose saturated by roof leaks in the Craftsman bungalows, and vermiculite in the oldest Lincoln Park homes that requires abatement protocol. Insulation Removal & Replacement covers our containment and disposal procedures.
Contaminated Insulation Removal
Signs you need it
You smell urine or see droppings in the attic, notice mold staining on insulation facing, or had a roof leak that saturated the material - all conditions that make existing insulation a health hazard, not a thermal asset.
What it costs in Pomona
Contaminated insulation removal in a typical Pomona attic runs $1,800-$3,500, with HEPA containment, protective gear, and specialized disposal adding to base labor versus standard removal.
How we do it
We erect containment barriers, use negative air machines with HEPA filtration, remove material in sealed bags, and apply antimicrobial treatment to exposed framing before any new insulation goes in.
Vermiculite & Old Insulation Removal
Signs you need it
Your attic contains gray-brown pebbly material that may be vermiculite, especially in Pomona homes built 1920-1980 - we test before disturbing, as asbestos content requires licensed abatement.
What it costs in Pomona
Vermiculite removal with asbestos testing and licensed abatement coordination runs $4,500-$9,000 in Pomona, with EPA-compliant disposal and clearance sampling included; negative test results drop cost to standard removal rates.
How we do it
We collect a sample for lab analysis first; if positive, we coordinate with a licensed asbestos abatement contractor under containment, then inspect and air seal before installing new insulation.
What Insulation Removal & Replacement Costs in Pomona
| Item | Typical range in Pomona |
|---|---|
| Standard attic insulation removal | $1,200 - $2,500 |
| Contaminated insulation removal | $1,800 - $3,500 |
| Vermiculite removal with abatement | $4,500 - $9,000 |
Can you remove insulation with knob-and-tube present?
We can remove insulation around active knob-and-tube wiring, but we cannot install new insulation over it - Pomona building inspectors flag this as a stop-work condition, so we coordinate with a licensed electrician to evaluate and replace K&T before reinsulating. We build this contingency into our written scope when we suspect K&T presence.
Do I need to leave during removal?
For standard removal, no - for contaminated or vermiculite removal with active abatement, we recommend vacating for 24-48 hours until clearance sampling confirms safe re-entry. We communicate this timeline in the written price before work starts. Call (626) 509-3237 to schedule an inspection.
Attic Air Sealing in Pomona
Attic air sealing in Pomona is the single most cost-effective envelope improvement for the city’s 1940s-1960s tract homes, which were built with continuous top plates, unsealed can lights, and duct boots that leak conditioned air directly into vented attics reaching 160°F. We never install insulation over an unsealed attic floor - the Haven Standard requires sealing first, insulating second, with blower-door numbers documenting the actual reduction in air leakage. Attic Air Sealing explains our testing protocol and what the written report includes.
Top Plate & Penetration Sealing
Signs you need it
You feel drafts from outlets and switches on exterior walls, or your blower-door test shows excessive leakage at the ceiling plane - common in Pomona’s postwar homes with balloon framing or unsealed partition walls.
What it costs in Pomona
Top plate and penetration sealing for a typical 1,400-1,800 square foot Pomona home runs $1,800-$3,200, with accessibility issues like low roof pitches or extensive recessed lighting adding labor.
How we do it
We access top plates through the attic, seal all gaps with fire-rated caulk or foam, address plumbing and electrical penetrations with appropriate materials, and verify with blower-door directed diagnostics that the leakage path is closed.
Can Light & Duct Boot Sealing
Signs you need it
Your recessed lights flicker in wind, you see dust streaks around ceiling grilles, or rooms farthest from the HVAC unit never reach temperature - all point to leaky ceiling penetrations dumping conditioned air into the attic.
What it costs in Pomona
Sealing can lights with approved covers and mastic-sealing duct boots runs $800-$2,200 in Pomona, with quantity of fixtures and ductwork configuration determining final scope.
How we do it
We install fire-rated airtight boxes over IC and non-IC can lights, seal duct boots with mastic and mechanical fasteners, and pressure-test the duct system to confirm no leakage at the attic interface.
What Attic Air Sealing Costs in Pomona
| Item | Typical range in Pomona |
|---|---|
| Top plate and penetration sealing | $1,800 - $3,200 |
| Can light and duct boot sealing | $800 - $2,200 |
| Full attic air sealing (comprehensive) | $2,500 - $4,500 |
What’s a good blower-door result for a Pomona home?
We typically see pre-sealing readings of 3,500-5,500 CFM50 in Pomona’s older stock and aim for 2,000-3,000 CFM50 after comprehensive air sealing - a reduction you can feel in reduced draftiness and see in lower cooling loads. We publish the before-and-after numbers on every applicable job.
Can air sealing be done without adding insulation?
Yes - air sealing is a standalone service, and in some Pomona homes with adequate existing insulation depth but poor envelope tightness, sealing alone delivers more comfort and efficiency gain than adding insulation over a leaky floor. We assess and recommend based on blower-door and visual inspection, not a default upsell. Call (626) 509-3237 for a written scope.
Wall Insulation in Pomona
Wall insulation in Pomona addresses the city’s most common hidden deficiency: the 1940s-1960s tract homes and early-1900s Craftsman bungalows were built with empty wall cavities or minimal rock wool that has settled to uselessness. Unlike attic work, wall insulation requires working within finished spaces or through exterior siding, and Pomona’s older homes often contain knob-and-tube wiring that must be evaluated before any cavity fill - a coordination step that distinguishes our wall work from newer-stock cities. Wall Insulation covers our methods and material options.
Drill & Fill Wall Insulation
Signs you need it
Your exterior walls feel hot to the touch in summer, you have no outlet drafts because there’s no insulation to stop airflow, or an infrared camera shows voids and settling in existing cavity material.
What it costs in Pomona
Drill-and-fill cellulose or fiberglass for a typical 1,200-1,800 square foot Pomona home runs $2,500-$5,500, with stucco exteriors requiring more extensive patching than wood siding.
How we do it
We drill 2-inch holes at stud bay intervals, blow in dense-packed cellulose or fiberglass to a settled density that resists settling, then patch and match exterior finish - stucco, siding, or brick - with documented photos of the repair.
Injection Foam Wall Insulation
Signs you need it
You need air sealing and insulation together in walls with significant leakage, or you’re insulating a Pomona home with irregular framing that leaves gaps batts can’t fill.
What it costs in Pomona
Injection foam wall insulation for a typical Pomona home runs $3,500-$7,500, with open-cell or closed-cell formulation chosen based on moisture exposure and whether the wall cavity can dry to one side.
How we do it
We access cavities through similar drill patterns, inject slow-rise foam that fills irregular voids and seals leaks simultaneously, then patch exterior finish and verify with thermal imaging that no voids remain.
What Wall Insulation Costs in Pomona
| Item | Typical range in Pomona |
|---|---|
| Drill-and-fill cellulose/fiberglass | $2,500 - $5,500 |
| Injection foam wall insulation | $3,500 - $7,500 |
| Exterior wall insulation with siding removal | $5,500 - $12,000 |
How do you handle knob-and-tube in walls?
We inspect with a borescope before drilling; if we find active knob-and-tube, we stop and coordinate with a licensed electrician to evaluate replacement - Pomona building inspectors will flag it, and we won’t fill cavities around energized K&T. This contingency is noted in our written scope.
Will wall insulation help with noise?
Dense-packed cellulose and injection foam both reduce airborne sound transmission through exterior walls; for interior soundproofing between rooms, we specify higher-density formulations and decoupled framing details. Call (626) 509-3237 to discuss your specific wall construction and get a written price.
Attic Cleaning & Rodent Proofing in Pomona
Attic cleaning and rodent proofing in Pomona is frequently the necessary first step before any insulation work can begin, as the city’s mature neighborhoods with established tree canopy and older rooflines provide continuous rodent highway access. We find droppings, nesting material, and urine-saturated insulation in attics throughout Lincoln Park and the postwar tracts - conditions that make new insulation installation pointless until the space is sanitized, proofed, and restored. Attic Cleaning & Rodent Proofing details our decontamination protocol.
Attic Sanitizing & Decontamination
Signs you need it
You hear scratching at night, find droppings in the attic, or smell ammonia when the HVAC runs - all indicate active or recent rodent infestation requiring professional decontamination before reinsulation.
What it costs in Pomona
Attic sanitizing and decontamination for a typical Pomona home runs $1,500-$3,500, with heavy infestation, extensive soiled insulation, or dead animal removal adding to scope and disposal costs.
How we do it
We remove all contaminated material in sealed bags, HEPA-vacuum framing and sheathing, apply enzymatic sanitizer to break down organic matter and odors, and run air scrubbers until spore counts drop to safe levels.
Rodent Proofing & Exclusion
Signs you need it
You’re trapping rodents repeatedly, seeing new droppings within weeks of cleaning, or finding gnaw marks at roof junctions and vent screens - evidence that entry points remain open.
What it costs in Pomona
Rodent proofing and exclusion for a typical Pomona home runs $800-$2,500, with tile roof complexities, multiple entry points, or deck and substructure access adding labor time.
How we do it
We inspect the roofline, soffits, vents, and foundation with the customer present when possible, seal all entry points 1/4-inch and larger with rodent-proof materials, and install vent guards and chimney caps where needed.
What Attic Cleaning & Rodent Proofing Costs in Pomona
| Item | Typical range in Pomona |
|---|---|
| Attic sanitizing and decontamination | $1,500 - $3,500 |
| Rodent proofing and exclusion | $800 - $2,500 |
| Full attic restoration (cleanout, sanitize, proof, reinsulate) | $4,500 - $9,500 |
Do I need to remove all insulation after rodents?
Yes - rodent urine and feces saturate insulation and create airborne health hazards; we remove all contaminated material, sanitize the space, and only then install new insulation with fresh, documented performance. Our written scope specifies exactly what comes out and what goes back in.
How do you keep rodents from coming back?
We find and seal every entry point 1/4-inch and larger, which for Pomona’s older homes often means roof junction gaps, deteriorated vent screens, and subfloor penetrations that have been open for decades; trapping without exclusion is temporary. Call (626) 509-3237 for an inspection with documented photos of what we find.
Home Energy Audit in Pomona
A home energy audit in Pomona gives homeowners the documented baseline they need to prioritize envelope work in a climate where cooling dominates and older homes leak conditioned air through every plane. We use blower-door testing, thermal imaging, and duct leakage measurement to show exactly where your 1940s-1960s tract home or Craftsman bungalow is losing performance - not guesswork, but pressurization numbers and infrared images you can see. Home Energy Audit explains our full diagnostic protocol.
Blower Door Test
Signs you need it
Your home feels drafty despite closed windows, rooms vary dramatically in temperature, or you’re considering any insulation upgrade and want to measure the actual air-leakage baseline first.
What it costs in Pomona
A standalone blower-door test with written report runs $350-$650 in Pomona, with multi-point testing and duct blaster combination adding to the scope for homes with complex HVAC configurations.
How we do it
We install a calibrated fan in an exterior door, depressurize the house to 50 Pascals, and measure CFM50 - the cubic feet per minute of air leakage at standard pressure - then use smoke pencils and infrared to locate the dominant leakage paths.
Thermal Imaging Inspection
Signs you need it
You suspect missing wall insulation, want to verify insulation was installed correctly after a previous contractor’s work, or need to document conditions for an insurance or real estate transaction.
What it costs in Pomona
Thermal imaging inspection as part of a comprehensive audit runs $450-$850 in Pomona, with standalone infrared survey of a specific issue like a roof leak or moisture intrusion at the lower end.
How we do it
We scan the building envelope with a calibrated FLIR camera during blower-door depressurization to exaggerate temperature differences, capturing images of missing insulation, air leakage, and moisture patterns that we annotate in the written report.
What Home Energy Audit Costs in Pomona
| Item | Typical range in Pomona |
|---|---|
| Blower-door test with written report | $350 - $650 |
| Thermal imaging inspection | $450 - $850 |
| Comprehensive audit (blower door, thermal, duct test) | $650 - $1,200 |
Will an audit tell me what to fix first?
Yes - our written report ranks findings by cost-effectiveness and comfort impact, so a Pomona homeowner with limited budget can sequence air sealing before insulation, or address the attic before walls, based on actual measured leakage rather than assumptions.
Can I use audit results for rebates or financing?
Our documented blower-door and thermal imaging reports satisfy requirements for most utility rebate programs and energy-improvement financing; we format the documentation to match program specifications on request. Call (626) 509-3237 to schedule and receive a written price for the audit before we arrive.
Brands We Service in Pomona
We source insulation materials from Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber - no proprietary lock-in means we specify what’s right for your Pomona home’s specific conditions. Our Los Angeles office maintains local stock of the most common formulations, so most jobs start within a week of written approval. See our brands for full specifications and warranty terms.
Pricing for Insulation in Pomona, CA
| Service | Typical range in Pomona |
|---|---|
| Crawl space vapor barrier | $1,200 - $2,800 |
| Full crawl space encapsulation | $3,500 - $8,500 |
| Attic radiant barrier | $1,500 - $3,200 |
| Radiant barrier with ventilation | $2,200 - $4,800 |
| Standard insulation removal | $1,200 - $2,500 |
| Contaminated insulation removal | $1,800 - $3,500 |
| Vermiculite removal with abatement | $4,500 - $9,000 |
| Attic air sealing (comprehensive) | $2,500 - $4,500 |
| Drill-and-fill wall insulation | $2,500 - $5,500 |
| Injection foam wall insulation | $3,500 - $7,500 |
| Attic sanitizing and decontamination | $1,500 - $3,500 |
| Comprehensive home energy audit | $650 - $1,200 |
Prices in Pomona trend higher than coastal markets for two reasons: the extreme thermal load requires more material and tighter specifications, and the prevalence of knob-and-tube wiring and degraded older stock adds preparatory work that newer cities don’t face. Every job begins with a written price - no work starts without it - and we offer a free second opinion on any competing written estimate.
Neighborhoods We Serve in Pomona
Our crews work throughout Pomona’s varied neighborhoods, from the historic Craftsman homes of Lincoln Park to the postwar tracts near Ganesha Park and the hillside properties above Phillips Ranch. Dispatch and scheduling are coordinated from our Los Angeles office, with typical response time of same-day or next-day for estimates.
- Lincoln Park
- Mayfair
- Westmont
- Phillips Ranch
- Downtown Pomona
Service Area - Cities Near Pomona
We serve homeowners throughout the San Gabriel Valley and eastern Los Angeles County, with regular work in Covina, CA, Azusa, CA, La Puente, CA, and West Covina, CA. Every service area receives the same Haven Standard: written price before work starts, documented photo record when the crew leaves, and before-and-after blower-door numbers on applicable jobs.
Serving Pomona, CA - Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation in Pomona
We typically schedule estimates within 24-48 hours for Pomona, with emergency calls for failed insulation, active leaks, or rodent issues answered by a live person 24/7 - no voicemail loops or callback windows measured in business days.
Most attic and wall insulation work in Pomona requires a building permit, especially when insulation type or depth changes; we handle permit submission as part of our scope and coordinate inspections, including the specific knob-and-tube evaluation that Pomona inspectors require before blown-in installation.
Pomona’s combination of older housing stock, extreme inland heat, and widespread knob-and-tube wiring creates a triple challenge that newer, cooler, or better-wired neighboring cities don’t face - meaning our Pomona scopes include more preparatory work and tighter material specifications to deliver the same performance guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60-minute.
- 4You approve before work beginsNothing starts until you say go.
What Pomona Customers Say
"Crawl space encapsulation done properly. Photographs of the vapour barrier at every seam, and the damp smell in the hallway is gone."
- Ainsley P."They photographed rodent damage in the old insulation that we had no idea about, and priced the exclusion work separately so we could decide."
- Harriet N."Two other companies quoted to blow more insulation on top of what was there. These were the only ones who said the existing material had to come out first, and explained why."
- Clifford E.